Aosp 4.3 R3 LS Smook Kernel S8500 (Update 22 Sep)

stkr1

 

Android 4.3 Badadroid Aosp 4.3 R3 LS Smook Kernel S8500 (Update 22 Sep)

Many of you were asking for the Android 4.3 Update with working calling and bluetooth feature is available now, with all thanks to Tigrouzen for making the Android 4.3 Badadroid Rom and Volk204 and Rebellos for making the calling feature working with the proper SIM detection.There are many other developers who helped them we are thankful for their support for this dying Bada OS users.

So just download the files below and flash it to your phone according to the instructions given the post and enjoy the smoothness of Android 4.3 Badadroid with almost everything working which you might use in your daily life. If you want to thank the developers for what they did and the efforts they put in for making this impossible task possible again and saving us from the Dead Bada Ecosystem then please try donating them if you can

Link to the Original Post:

http://forum.xda-developers.com/showthread.php?t=2092353

What mean SD Rom :
Bada stay completely and you can try more then 2 rom

What mean movieNand Rom :
Bada completely erased and you can used fully SD

Wave S8500

AOSP 4.3 Doesnt have TVout support
CM 10.2 Doesnt have TVout support
Make some search about it
This is from Paranoid and Cm Dev :

Quote:
TV Out: unsupported, will never work (proprietary, undocumented)

But im sure all its possible, now the question its if lbtvout doesnt work with 4.3
That mean we need Samsung make new libtvout 4.3 for i9000 like phone

I dont have Tvout cable for test
I dont have Tv with Tv cinch enter
They dont have any about Tvout too

Don’t use program tweak like sd speed or other !!!!

Project thread : http://forum.xda-developers.com/show….php?t=1459391
Rebellos’s CM10 “Jelly Bean” thread : http://forum.xda-developers.com/show….php?t=1851818

How Install This Rom First Time :

Before boot with this kernel read this :

For SD version

Kernel have new swap method but need clean bada, because we use 300mo for swap then make some copy paste to dont not erase bada, this is why need clean bada to not got error at creating swap.

If its first install :

A) Backup Your SD if you use SD kernel
B) Push Kernel SD or Nand on SDCARD
C) Flash FOTA SD

Attention : This Rom erase all then make backup your apps before with Backup app Tools

1A : If all ready have SD partitioned then go to 2 else go boot on recovery mode go to advanced menu > partition sdcard and choose half of your SDCARD then choose 0 for swap

1B : if your use Nand kernel you dont need partition it, its all ready script detect and format it

2 : On first menu go to mount and storage, mount usb storage, Push unzipped “clockwork” folder on SD, dont forget umount your SD on desktop before hit home key too umount on recovery mode

SD : back to first menu choose restore & backup menu then restore choose rom 2013-09… and Yes – Restore

Nand : back to first menu choose restore & backup menu then advanced restore choose data rom 2013-09… then Restore system & Restore data dont Restore cache

5 : reboot

AOSP 4.3 R3 :

Rom AOSP its an mix with CM 10.2
Used graphic & bionic library from Aosp
Mixed framework
Mixed Apps 

ROM 4.3 LS V2 Revision 3http://www.multiupload.nl/SEOYNN9RR7
Rom LightSpeed
Bigmem & FMSpirit & Update all ready inside
With last part of modem from Volk204 work thank to him
You can use SmooK SD or Nand

Smooth Kernel V3 :

SmooK V3 SD http://www.multiupload.nl/HQ3BM7DOTH
Remove KSM (bad science for android)
Removed think needed on computer not phone (scsi…)
6mb space more on Normal and Bigmem
Corrected script for fresh install
Big mem fix
Dsp active fixed
Remove debug
USB OTG
Call sound
Bluetooth Fixed

SmooK V3 NAND http://www.multiupload.nl/Z4LHMI2DZN
Same SD for Nand
With Zram because real swap crappy on nand
If you want reback to SD you need reflash Bada before

Fota SD :
Rebellos FOTA modified by myself & ihavenick SD : http://www.multiupload.nl/IKPQ8OVYGC

Fota Boot Option :

Power = Android
Power + Call = Bada
Power + Home = Recovery Mode
Power + VolUp = Rom2 (absolutely need Power + Volup) (futur)

For question or problem please preferred use irc badadroid channel 

You can use http://webchat.freenode.net/

Nickname : username (at your choice and not “username” ^^)
Channel : #badadroid

Or use xchat or something similar

QtAdb :
http://www.multiupload.nl/611AQK44BC

Superb or the best tools for debugging tweak and shell



You Can :
Debug logcat
Add remove app from System and Data
Tweak all file on explorer
Send receive files
Shell command
Send read sms

How its work :
Active Dev mod on Phone
Check Usb debugging on Dev menu
Plug it on computer
Run Qtadb wait
That’s all
For copy past just use mouse to capture text then CTRL+C & CTRL+V for past

HpUsbTool :
Erase full mbr sdcard

http://dl.commentcamarche.net/www.co…Disk-2.2.3.exe

Cyanogen :
http://www.cyanogenmod.org/

Devil Kernel :
https://github.com/DerTeufel/samsung-kernel-aries

Rebellos :
Kernel
https://github.com/Rebell
Fota
https://code.google.com/p/badadroid/

Volk204 :
https://github.com/Volk204

ihavenick :
https://github.com/ihavenick/Fota.git

Sd & Nand Kernel :

https://github.com/Tigrouzen/Samsung…Kernel_SD_NAND

Fota :
https://github.com/Tigrouzen/Fota

Thank for all donator for buy Wave and making rom better !!!

Bookmark and Share
  • robert diaz

    great work!! tigrouzen and others are really great!! i think next target will be tizen os for wave phones! hahaha goodluck developers!

  • robert diaz

    but wait..what if i already had 4.3 flash on my phone? how can i flash this new rom?

  • Gauresh Patil

    gOOD WoRk gUyZz bUt pLZ GUYZz mAkE iT fOR 8530 tOo……. :(

  • Peppe Pascale

    i was wating this day from so LOOONG tme! never done aporting.. a tutorial for newbies would be great

    • Peppe Pascale

      We need a tutorial!
      I can’t wait to try this android on my wave!

      • Peppe Pascale

        don’t know how to set multiloader and wich is the correct steps to follow for S8500.. :(

        • Peppe Pascale

          following a DIY guide written in this comments i finally understood how to install this NERDY stuff.
          for now intallation end with “cyanogenmod loadin blue circle..”
          30 minutes are passed with no news.. still loading.. no news.

          mmm… nice blue circle. usefull!
          Any help?
          -.-

          • Mall Jamal

            are you using restore or advance restore?

          • Peppe Pascale

            IT WORK, but different procedure: (i have s8500)
            1) first multiloader to install a clean bada version, the last avaible taken from samfirware site
            2) copied rom and zimage on phone mem.
            3) installed boot fota WITHOUT press power and call, while bada running. WORK! O_O
            4) now press POWER and CALL then install cryogen.

            I found this problems:
            -can’t find ANDROID MARKET!!!
            -3g internet doesnt work.
            -some lags on browsing

            -sometimes calls fall down
            -when reboot to BADA, SO cant find battery

            I had to learn how to port an OS in one night, i think i was lucky, i read that many people brick the phone.
            For now all works but battery problems with bada.

            I would like to know how to DELETE BADA and have MORE RAM for android, i think more ram avaible will get rid of lags

          • Mall Jamal

            what bada firmware u used? are u using custom firmware or the original firmware from samsung?
            I using custom firmware S4 Style TurkoCFW V10.1 S8500 by hero355&Frager.

            The 3g still not works in badadroid at this moment.
            I’m using Aosp 4.3 R3 LS Smook Kernel S8500 (Update 22 Sep) and running fine. There already have Play Store.

          • Pedro Faria

            Not is Android Market, the correct is Google play, and for have Google Play do you need install Gapps, because Gapps contains default app of Google

      • Mall Jamal
  • Mall Jamal

    woww!!! nice instruction….
    downloading…………………..

    • Abdul Ghani

      is the method any dfrnt from how we installed CM 10.1 ROM? plz just tell me if I have downloaded the ROM SD Rom and SMOK Kernal wht I should do next..

      • Mall Jamal

        I’m still have problem .. :)
        I didn’t test this rom yet.
        But you can follow the instruction from this page.

        • Abdul Ghani

          i got stuck after partition step as in the mount USB storage there was no option of mounting clockwork file….

  • radu

    does 3GP works ?

  • Gagan Ahuja

    so much bugs…. waiting for the final release….

    • Abdul Ghani

      plz if u can explain the installing method!!

      • Gagan Ahuja

        1) Install Bada 2.0

        2) Place zImage( 7.23 MB file) on your memory card (SD CARD – not the phone memory) http://www.multiupload.nl/HQ3BM7DOTH

        3) Start Download mode on your handset by pressing Lock Key+ Volume Down + Power Key for some seconds

        4) Start multiloader on your PC and flash fota sd http://www.multiupload.nl/IKPQ8OVYGC

        5) once mobile restart press and hold power key untill you see white screen with the text (WAVE) (if you get file not found on white screen this means you have n’t placed zImage on memory card(SD CARD))

        6) When your wave load Recovery Mode then go to advanced menu > partition sdcard and choose half of your SDCARD then choose 0 for swap

        7) Once partition done then go back to previous menu(Main Menu)

        8) Enter mount and storage > mount usb storage, Push unzipped “clockwork” folder on Memory Card (SD CARD) http://link.safelinkconverter.com/?id=aHR0cDovL3d3dy5tKmx0XypwbCghZC5ubC9TRU9ZTk45UlI3&c=1&user=11095

        Note:- you should have zImage and clockwork folder in your memory card(SD CARD)

        9) Unmount your memory card (SD CARD) on PC and then press Unmount on your mobile phone

        10) go back to main menu (Recovery mode main screen)

        11) Enter backup and restore > restore > choose rom 2013-09> Yes

        12) Wait 4-5 min approx

        13) enter reboot system now on the main screen (Recovery Mode)

        14) Wait again for 6-8 min (You can see Google logo ind boot animation)

        15) booting is slow on my mobile so it may take 10 mins

        16) Network signal may take more time to come after android booting is complete

        That’s it

        • Abdul Ghani

          thanks a lot!!! one small qs.. with FOTA do i hve to flash the bootfiles as well? also i need to tick LSI Boot change and full download in multiloader?

          • Gagan Ahuja

            no need to flash boot files
            just start multiloader place fota and click download

          • Abdul Ghani

            wht abt the options dat i should tick in multiloader??? full download bootchange?

          • Gagan Ahuja

            no need to tick any option
            just choose LSI if not selected

          • Abdul Ghani

            i flashed FOTA I see white screen which says Wave.. but den nuthing happens and screen goes black

          • Gagan Ahuja

            you have to wait for atleast 2-3 mins for recovery mode to load
            if it doesn’t then press and hold center button+power off key to restart the recovery mode loading again

          • Abdul Ghani

            and it loads after black screen? cuz white screen saying wave appears for arnd 10 seconds

          • Gagan Ahuja

            yes it ll load after black screen

          • Gagan Ahuja

            reply if you stuck in black screen for more than 10 mins

          • Abdul Ghani

            ok the recoery mode is open now.. i partitioned the sd card and it says partition complete.. next i go mount and storage and then mount usb storage.. but the only option i get is unmount or go back :( i placed the zimage and clockwork.7z on memory card… i have plugged in my phone to pc via usb

          • Gagan Ahuja

            wait wait

          • Abdul Ghani

            i placed it there the extracted folder rather than the zipped file… do i need the phone to be plugged in pc when i boot into recovery mode?

          • Abdul Ghani

            still same issue.. is there any way to unpartititon the card and start again???

          • Gagan Ahuja

            you can do so by starting bada again and formatting your memory card

            press and hold call key + power key to start bada again

          • Abdul Ghani

            damn i messed up my card.. i again went to the parition option and choose partition size 1024mb which was the actual size and now phone wont go into recovery mode as it says file not found nor wud the memory card show in bada mode… any solution for this or shld i try wid andr sd card?

          • Gagan Ahuja

            what is the size of your sd card

          • Abdul Ghani

            1gb.. and i had initially partitioned it half… and now i opted for 1024mb.. result is dat recovery mode wont boot nor wud memory card show up in bada :( shld i use a new card or is there any way to save my sd card??

          • Abdul Ghani

            btw thanks for keeping up and helping me along :)

          • Gagan Ahuja

            Your Welcome :)

          • Abdul Ghani

            jst to be clear i need to hev both zimage file and clockwork folder in memory card BEFORE partition right?

          • Gagan Ahuja

            no zimage before partition and clockwork folder after partition

          • Abdul Ghani

            so i place zimage and partition.. then i boot into bada and place clockwork and den start recovery mode again? :s

          • Gagan Ahuja

            place zimage boot into recovery , partition card , mount storage within the recovery mode and place clockwork folder and restore this folder within the recovery mode

          • Abdul Ghani

            ok i got lost again… if we can plz go one step at a time.. I placed only zimage file in memory card… and turn off phone.. start wid recovery mode and partition the sd card.. and den yru saying i shld go to mount storage –> mount USB Storage? and i shldnt place clockwork folder in memory card all this time? when u are saying place clockwork folder how do i do dat? i am sorry for asking dat many qs but rly I am new at these things

          • Gagan Ahuja

            okay i ll help you after 2-3 hrs. I am busy now

          • Abdul Ghani

            thank you :)

          • Gagan Ahuja

            Done?

          • Abdul Ghani

            no ;( :( see my above post

          • Abdul Ghani

            ok i understood the mounting part… here is wht i have done till now
            1) Copied Zimage file on memory card
            2) Flashed FOTA given above

            3) In recovery mode partitioned my 1 gb card by specifying 512mb and then 0 for swap
            4) Then i go into mounts and storage and choose USB Storage
            5) I am able to access memory card on my pc and I copy the UNZIPPED clockwork.7z folder in the memory card.
            6) I unmount the SD card from computer and choose unmount on phone
            7) I go to main menu and choose backup and restore
            8) I choose restore but get the same screen again with the error showing on the bottom of screen dat no files found :(

          • Gagan Ahuja

            file not found error on the white screen?

          • Abdul Ghani

            ok i understood the mounting part… here is wht i have done till now
            1) Copied Zimage file on memory card
            2) Flashed FOTA given above

            3) In recovery mode partitioned my 1 gb card by specifying 512mb and then 0 for swap
            4) Then i go into mounts and storage and choose USB Storage
            5) I am able to access memory card on my pc and I copy the UNZIPPED clockwork.7z folder in the memory card.
            6) I unmount the SD card from computer and choose unmount on phone
            7) I go to main menu and choose backup and restore
            8) I choose restore but get the same screen again with the error showing on the bottom of screen dat no files found :(

            Now what should I do?

          • Gagan Ahuja

            you mean you see file not found on white screen

          • Abdul Ghani

            no no… i am able to enter recovery mode.. after i mount usb stroage and copy the clockwork folder in SD card and go to backup/restore option it is not able to restore.. i do not get the option of restoring 2013-09 file… instead it says no files found in the recovery mode!!

          • Gagan Ahuja

            you should have this in your sd card

          • Gagan Ahuja

            then try restoring it

          • Abdul Ghani

            says MD5 mismatch

          • Gagan Ahuja

            which kernel you have downloaded (zImage) ?

          • Abdul Ghani

            the 7.24 mb one… the ROM I downloaded was roughly 153 mb in size from teh link given in the first post…

          • Abdul Ghani

            yeah this is wht i have.. if u open the the clockwork there are two files right? one backup folder and one recover_version?

          • Gagan Ahuja

            if you have another phone put it int it and try to format it from that phone.
            In my case i am having 8gb card and the recovery mode shows 4096mb and i chose half of 4096.
            I don’t know if you can run it on 1gb card . Take help from XDA forum or ask from original thread

          • Gagan Ahuja

            no

          • Gagan Ahuja

            place the folder named clockwork on your memory card and not the clockwork.7z.

          • Gagan Ahuja

            unzip the 7zip file and place the folder onto memory card

        • Massy

          Very nice explanation, it works !
          thank you

        • Martin

          what is with s8530 this fota sd is not working on s8530

        • Martin

          help how to install 4,3 on s8530

  • Gagan Ahuja

    main problem—> less RAM

    • manu

      Finally I was able to follow the instructions and easy steps from Gagan given for Abdul. And able to install JB 4.3, but i am facing issue no cellphone operator signals working nor I can see back, home and magnify glass lower bottom screen… please help and also provide me information what is difference between Smooth Kernel V3 & AOSP 4.3 R3

      • Gagan Ahuja

        you can try wipe data/factory reset because this works for me. only data/factory reset in recovery mode

        recovery mode press and hold middle key + power off key

        then reboot system now

        it may take upto 10 mins to load android and may take another 5 mins for network search after android load completes

        • Gagan Ahuja

          smooth kernel is a kernel which handles OS
          AOSP 4.3 R3 is itself an OS

          • manu

            please tell me which to install both one method you told for : – AOSP 4.3 R3 is clockworkmod.7z (152.35 MB)

            what about these

            SmooK V3 SD is zImage (7.24 MB)

            or

            SmooK V3 NAND is zImage (7.24 MB) what is use and difference in them?

        • manu

          Well I am trying to reset it.

          • manu

            Gagan I have tired it still no go Unable to get the sim card working

        • manu

          Well thank you I was able to do it, But the issue is the signal comes and goes, Not stable. on bada works fine. I think there is bug in this new OS, 2) menu and everything has very good response. I mean transition is good, but when comes to calling or opening any applications it there is some lagging and freezing. Also I would like to know if we can modern combat and others?. And do you know how to install opp data and games already cracked in android?

  • manu

    I am still confused which files to download how to flash and how to partition SD and how to mount sd in bada.. no screen shoots or complete video details present,.. some one help me..

    • Saurav Singh

      which ph u r using…wave 1 or 2

      • manu

        I am using wave 1 8500

        • Saurav Singh

          in which step u r facing problem…during installation

          • manu

            It says MD5 mismatched

          • Saurav Singh

            Bada 2.0 is required

            Enter Bada Settings->General->Memory and make sure you have at least:
            370MB of free “System” memory
            160MB of free “User” memory
            400MB of free “Applications” memory

            Download BOOTFILES, armlinux_boot for your device from http://goo.im/devs/Rebellos/wave (please pay attention if it’s S8500 or S8530 BOOTFILES and FOTA you’re choosing!):

            Download ROM: http://www.multiupload.nl/3QF7PV7HJR

            Start Bada.

            Extract zImage from zip and copy it to the Bada’s User partition (the one about 390MB big).

            Copy whole .zip to the Bada’s User partition.

            Flash BOOTFILES and FOTA using Multiloader.

            Reboot the phone holding Power and Call key.

            FOTA set of red messages should appear, after about 15seconds Badadroid logo shows up.

            Be patient, first bootup will keep unresponsible on Badadroid logo for up to 5 minutes.

            CWM Recovery starts, pick:
            - install zip from sdcard
            - choose zip from sdcard
            - cm-10.1-wave-.zip
            - Yes – install

            Reboot holding the Power key

            You can remove installation .zip from the User partition from Android level by connecting through USB in MTP mode.
            Do not remove zImage file.
            Normal bootup is available using Power+Call keys
            CWM Recovery mode is available using Power+Volume Up keys
            CWM Flashing does overwrite zImage. So every next update you can just flash .zip through CWM.

          • Saurav Singh

            no need of swao sd or partition the sd card

          • Abdul Ghani

            this is installation for CM 10.1 not Asop ROM

          • Saurav Singh

            for cm v1.2…i am not tried Asop ROM yet…

          • manu

            Thank you Saurav, please try this 4.3 and provide the installation instructions, Where we are posting for help and support. is not for cM 10.2 which is 4.2 (http://www.tizenhub.com/2013/09/cm10-1-badadroid-v1-2-wave-12-update-21-sept.html) THIS I have already tried the other one (CM 10.2) which easy gets installed not this one 4.3.

            CM10.2 is slow and lagging is there freezes sometimes. unable to download and play big games HD games… so trying luck with 4.3.
            I understand the developers are trying hard and high to unlock this to new working deminsion.. let us hope for the best since I am using bada wave 1 since 3 yrs. also hoping for the best from these badahub firmware mod developers

            So back to same question how to install 4.3 1Q) do i need to download and follow the instructions for Smooth Kernel V3 or Smook V3 NAND only I have to dowload and install ROM 4.3 LS V2 Revision 3,
            2Q) are these different firmwares to run 3 different Andorids?
            3) someone can upload full recording as well as step by step instructions with screen shoot

          • Abdul Ghani

            i faced problem in mounting the clockwork file… the recovery mode starts and i partitioned the sd card… but when i go the mount usb storage i get only unmount option :(

          • Guest

            NO need to swap sd or partition sd card

          • Abdul Ghani

            so i shld place both zimage and clockwork folder in SD card before loading recovery mode?? when i do dat i cnt find clockwork folder when i click mount usb storage :(

          • Mall Jamal

            ummount mean your USB already mount. That mean your phone already connect to laptop/pc.

          • iamthebest

            hey bro 4.3 will works in wave 2 s8530..??

  • iamthebest

    m using wave s8530 .. using bada 2 os and i have installed android 4.2.2 (CM10.2 rom )as well but many bugs in that 4.2.2 … i wans to install this
    (,Aosp 4.3 R3 LS Smook Kernel S8500 (Update 22 Sep) will works on S85030 also ??

    • mkhk8367

      Who agrees?

      Just an Advice for “who has just one mobile” …

      Don’t waste your time looking forward to hearing about any BadaDroid (they are all the same)

  • Saurav Singh

    try this!!! i am using wave 2

    1 Enter Bada Settings->General->Memory and make sure you have at least:

    370MB of free “System” memory

    160MB of free “User” memory

    400MB of free “Applications” memory

    2 bada 2.0 required…

    3 Download 3 files boot file,fota and cm v1.2 rom files (please pay attention if it’s S8500 or S8530 BOOTFILES and FOTA you’re choosing!).

    4 extract the cm v1.2 file on desktop now copy only zImage file into ph memory and then cm v1.2 and zImage file into sd card(memory card).

    5 Now open multiloader tick at LSI,Full Download mode then select boot file and fota file.

    6 click port and then download after insttalition you ph starts disconnect from usb and now copy and paste cm v1.2 file from sd card to ph memory and switch off your ph.

    7 NOW HOLD CALL AND POWER KEY….FOTA SETUP RED MASSEGES.

    8 Be patient, first bootup will keep unresponsible on Badadroid logo for up to 5 minutes.

    9 CWM Recovery starts, pick:

    – install zip from sdcard

    – choose zip from sdcard

    – cm-10.1-wave-.zip

    – Yes – install

    Reboot holding the Power key.

    10 You can remove installation .zip from the User partition from Android level by connecting through USB in MTP mode.

    Do not remove zImage file.

    Normal bootup is available using Power+Call keys

    CWM Recovery mode is available using Power+Volume Up keys.

  • badaDROID

    I placed zImage on memory card(SD CARD) But I still get ” file not found ” on white screen !!!???

    PLZ hand me!

    • Mall Jamal

      use other previous zImage.

  • badaDROID

    It happened after I flashed the FOTA that recommended in this topic

    Fota SD :
    Rebellos FOTA modified by myself & ihavenick SD : http://www.multiupload.nl/IKPQ8OVYGC

    and when I flashed with another FOTA from CM10.1 Badadroid v1.2 Wave 1,2 (Update 21 Sept) topic , it was solved and my device boots normally in bada !!

    but the Android 4.3 Badadroid Aosp 4.3 R3 LS Smook Kernel S8500 (Update 22 Sep)

    dose not boot up!!!

    • Guest

      Thanks!
      I solve my problems by myself

      • Abdul Ghani

        i get MD5 mismatch when i tried to do the restore step.. using the LS V2 Revision 3 ROM and SD Kernal posted above.. any help wud be appreciated

        • Peppe Pascale

          i’m fighting from days against this MD5 mismatch and cant find solution (odin or else).. how you resolved this?

          • Abdul Ghani

            i dnt knw how exactly i resolved it but if u use the method exactly as given above u dnt get an MD5 error

    • Mada Suke

      what you do after its boot normally?

  • mkhk8367

    What does this means?
    Has the project FINISHed?

    http://forum.xda-developers.com/showthread.php?t=2092353

    Closed For Maintenance

    by Tigrouzen

    Source: xda-developers

    • Jos

      Oh! So sad…. How can they just closed it…! They’re almost finished their project. We are really2 proud of it when we got a new update from our developers. Just finished your project developers….please….

  • RyanDesigner

    Can You make a TUT video about install this Rom???
    I can do this because it’s very dangerous so i need more help!!!
    PleaseZZZ

    • Mall Jamal

      yesh.. it’s dangerous, but with correct step no need to worry. :)
      are u familiar using multiloader? are u have use flash firmware before?

      • Xuinn

        Can you make step by step for fresh install? :)
        Regards from the PH :D

        • Mall Jamal

          Okay’ I’ll try.
          I make tutorial about install AOSP 4.3 rom.

          • Ankit Gandhi

            Thanks a lot buddy…plz make a TUT of installing NAND version as well

          • Mall Jamal

            but this is not for nand

            http://adf.ly/WTt6t

      • Ankit Gandhi

        @malljamal:disqus plz…i have been waiting for such a long time…plz make a TUT video or atleast give step by step instruction on how to install this rom in NAND as i really cant understand the instruction given on this page.. i dont wanna keep bada…plz i would really appreciate if u can make TUT video of how to install in NAND mode…thanks :(

        • Mall Jamal

          For me, it’s best to keep bada. even you want to use Nand version, bada still exists in there I think. :)
          The problem is, I cannot make a fresh install for this rom. Because I already download many android apps and games in my wave. So I can’t make a tutorial for this. But, I will try to make step-by-step how to install this rom. Give me time. Okay. I will make one tutorial today.

      • RyanDesigner

        Yes! i had used flash firmware. But my English is not well so i can’t understand all. some forum about Bada in my country doesn’t mentioned Badadroid. now i trying to install AOSP 4.3 rom from this TUT http://adf.ly/WTt6t

        THANK YOU SO MUCH!!!

        • Mall Jamal

          don’t forget to tell us if you success to install android in your wave s8500.

  • Abdul Ghani

    I got the ROM running but still network isnt detected :( Can any1 tell me which kernel I should use? and wht the method wud be to change the kernel?

    • Mall Jamal

      just push/copy zimage into sdcard.
      I’m using previous kernel for Aosp 4.3 and LS SD S8500.

      • Abdul Ghani

        can u post teh link for it? and everything call msgs are workign fine for it? i am using the 7.24mb one given in this thread

        • Mall Jamal

          I have search it in this tizenhub but I can’t find it, maybe developer already replace that zImage. I’m sorry.

  • angel19841111

    Hi, battery and charging fixed, working?

    • Mall Jamal

      yes,, it’s works.. no extreme overheating in battery.

  • amit

    can i install this to wave S8530????

    • Mall Jamal

      this works for wave 2 too..

      • Jos

        Dude..! Are you sure it will works in wave 2. It mention only wave 1.

        • Mall Jamal

          it’s works in cyanogenmod. CM10. You can see it in there’s post. :) But, you need to ask other who use it in wave 2 too.

  • Gabriel

    Hey i’ve android 4.0.4 and bada with dual boot, both installed on my cel memory.
    What i have to do to install this 4.3 version?
    Deleting android 4.0.4 slim from cel memory, hard reseting bada 2.0 and reinstalling it may cause some problem?

  • Ankit Gandhi

    I am sorry to say this but the language is really poor on this post and its really hard to understand. I would appreciate if someone can ‘redo’ this post with understandable English.
    p.s. I am not trying to offend anyone. If I did then I am truly sorry.

  • Mall Jamal

    I’m very surprised when first time this rom load, the GOOGLE text and new animation.
    Yeaah!!! this rom was fast, it’s really fast.. I think this is the real android now! special thanks Tigrouzen for making the Android 4.3 Badadroid Rom and Volk204 and Rebellos .. and I really like for this dual boot for using Bada and Android in my Wave S8500. :)

    • Abdul Ghani

      i got the ROM running and like u said it was very fast.. however i incurred a problem.. I powered off andriod to boot into bada but somehow dat messed up my SD Card which is no longer detected :( now I cant boot into android nor format my SD card.. I tried using the SD card in some odr mobiles but no use.. Is there a recommended SD Card because I was using a 1 GB card which I had partitioned to 512 MB….Also @malljamal:disqus can u tell me which Rom and kernel did u use? I installed a different Kernel and while network was detected there was a problem in audio calling as all the other person cud hear was noise…

      • Peppe Pascale

        please, how to install this update?

        • Mall Jamal

          there’s the step above how to update in this website

          • Peppe Pascale

            thanks, i can’t find it… will look forward again

          • Mall Jamal

            okay, if ya have problem just le me know. I will help If I can.

          • Peppe Pascale

            FOUND! thank you.
            i’m usin last bada 2 official version S8500NELB1_S8500HUILB1_HUI

            can you explain me how to change ROM?

            i have a file called clockworkmod, how i have to use it?

            decompress in ph memory an install?

          • Mall Jamal

            just put the clockworkmod into sd card, then go to advanced restore and restore it one-by-one.

          • Peppe Pascale

            when i choose advanced restore it say COULDN’T OPEN DIRECTORY – NO FILES FOUND

          • Mall Jamal

            what is the size of the sdcard are you using?
            is the sdcard already have partition?
            if that card already have partition, try to delete the partition and make partition again in recovery mode.
            choose half of your sdcard size, then choose 0.
            after that, in reovery mode, go to mount and strorage, mount and copy the Clockworkmod into sdcard.
            Now you can find the clockworkmod in restore and advanced restore.
            let me know..

          • Peppe Pascale

            I never done a partition…!
            in fact i noticed bada and android files and folders all togheter in sd card.. let me try..
            Thank you for your time and support Jamal

          • Mall Jamal

            it’s okay, :)
            just make partition because android rom need partition in sdcard beacuse the file in system restore need it.

      • Mall Jamal

        I’m using 8GB.. and using kernel Aosp 4.3 and LS SD S8500.
        I think there’s no problem if u using 1gb. What software your use to delete the partition in your SD CARD?

    • sajad

      most of the times , when I want to call somebody , it shows “end call”
      to me but it is connected to the guy on the other side of the phon , and
      when somebody calls me , it does not ring …. help me pls …. it is
      very bad bug….

      • Mall Jamal

        I don’t have problem like that. what firmware u used? is it the original firmware or custom firmware for bada?

        • sajad

          torko cfw10 ….

          • Mall Jamal

            which rom you used?
            CM10 4.2 or AOsp 4.3?

            I’m using aosp 4.3 rom, and I don’t have problem using it.

          • sajad

            this problem exists in both roms…. but now i use aosp4.3…. does it relate to frimware????

          • Mall Jamal

            I’m not sure about this if it’s related with firmware.
            I’m using S4 Style. Actually, I didn’t use this android to make call or reciver call or sms. I’m just test if it works and it’s works. After that, I just use this android for using apps and playing android games. I’m still using Sony Ericsson Aino to make call and sms because battery life and I can freely enjoy using android in my wave :)

      • Mall Jamal

        I have found out that the End Call not works when we make call. I have change it in setting make End Call function works but still don’t works. But it’s okay, because I still can cancel / end call with just the red button in touch screen. :)

  • m_sadegh

    new update by volk204 :

    Update2 for v1.2 http://www.multiupload.nl/NMIONOUBJ9

    Changelog:

    Reworked Call interface

    Big kudos to Rebellos

    Please report bugs with logs, without logs it is useless

    http://forum.xda-developers.com/showthread.php?p=45854780#post45854780

    • Ankit Gandhi

      will this update make my calls work…i cant get anynetwork

      • Ankit Gandhi

        nad how do i install this update

  • Mall Jamal

    here’s the preview for this new rom

    • Kasun Hp

      Hi Jamal, I have flashed with the Aosp 4.3 R3 LS Smook Kernel S8500 but boot up screen is still the old hellybean one. How do I get the latest ROM? thanks

      • Mall Jamal

        I’m using this .
        ROM 4.3 LS V2 Revision 3: http://www.multiupload.nl/SEOYNN9RR7
        are you using this rom too?

        • Kasun Hp

          im using the one available in Tigrouzen’s post. thought this is same ROM. is this developed by Tigrouzen as well? where is he posting updates now?

          • Mall Jamal

            there’s 2 rom here in tizenhub. Cyanogenmod
            If u using CM10 that’s android 4.2, it’s not same with Android 4.3. I’m using AOSP android 4.3 rom.
            I think Tigrouzen have works with this 2 rom also. Maybe

    • Pawan Bisht

      This is the first time was rooting my wave.

      I tried using your links, after fota download phone turned off but didn’t restart, now it is only going to download mode. nothing else works.

  • Arpan Pansuria

    Hey!!!! I can’t use my sim card’s internet(2g or 3g). Which is the only thing for me is to left for wave as a regular life phone…

  • badaDROID

    Congratulation !
    This ROM is supporting Iranian Mobile networks Operators such as MCI , MTN ,…

    • manu

      So is there any way we can support or add operator for our country? india

  • Arpan Pansuria

    Hey!!! Sim card’s internet (2g or 3g/ data plan) not working……!!! Help!!!

    • Peppe Pascale

      yeah… call and sms work with some bugs but DATA USIM doesnt work.

  • Er Mayur Panchal

    what for wave 2 s8530

  • badaDROID

    Hi!
    Where is the ” USB debugging ” in this ROM ?

  • sajad

    most of the times , when I want to call somebody , it shows “end call” to me but it is connected to the guy on the other side of the phon , and when somebody calls me , it does not ring …. help me pls …. it is very bad bug

    • Peppe Pascale

      me too. we should report bug on xdadevelopers

      • sajad

        Someone not answer …. this is big bug

  • sajad

    this bug exists in both roms…

  • MEHDI

    Work Great for me Thanks Tigrouzen

    • sajad

      mehdi shode vaghti mikhay be kasi zang bezani natooni ya vaghti behet zang mizanan gooshit zang nakhore …. kheilia in moshkela daran toam dari in moshkelo ?????

  • itsnot.me

    Can anybody help me? I tried to restore the backup but then the error message appears “Error while restoring /system!”
    I have tried the recommended and other zImages and Fotas, i have a clean bada and downloaded and extracted the clockworkmod twice, i also formated /system i dont know what i can do now … can anybody help me pls ? :D

    • Mall Jamal

      are u already partition your sd card?
      I recommend that you make backup for you sdcard first,
      format or delete the already partition in your sdcard.
      and make partition in recovery mode.

      if you already have partition in your sdcard.
      you can use Advanced Restore and restore it one by one.

      • itsnot.me

        Thanks for your answer :D
        i have partition my sd, but now there are only 4 gb less space on it and i cant find the new 4 gb partition, do you know how to delete the partitions ? and i have already tried to use advanced restore but there appears the same error :/ i dont know what to do now :/ do you have any more ideas? :D

        • Mall Jamal

          I suggest you using MiniTool Partition Wizard Server Edition to delete partition. It’s easy using this software. Don’t forget to backup your sd card.

  • Juraj

    Turko cfw v 10.1 install android help please help me how to install android

  • Prashant

    hi jamal please answer my que.
    1: Does it work for wave 2 or not
    2: if i use NAND wil it mean that i have more ram for android..

    • Mall Jamal

      I think it’s not 100% works in wave 2. But you can try the previous rom because I have seen in there’s topic that it will works for wave 2 too..

      About the nand, I don’t know more about it because I’m using wave 1 (s8500)

  • badaDROID

    Hi again !
    I installed the “UnlockRoot Pro software” but I couldn’t connect my device to it !
    and I haven’t USB Debugging mode on my phone

    moreover there is No Application in Setting menu

    What should I do ?!

    • sajad

      usb debuggin too hamoon tanzimate developer optione oonja bayad begardi donbalesh

      • badaDROID

        akhe developer option ham nadare?
        shoma khodetoon in rom ro nasb kardin?
        kode makhfi vase in gozine hast?

        • sajad

          are man khodam estefade mikonam …. ru build number 7 bar bezan miad tanzimatesh

    • Mall Jamal

      you must have usb driver for it, android fo wave is like I9000 ( samsung galaxy S) that mean you must have that driver install in your pc/laptop.

  • Abdul Ghani

    @malljamal:disqus I am encounterting a weird sort of an issue.. the phone boots alright after the installation process.. for the first boot of andriod it takes around 7-8 mins to load and then it takes arnd 20-25 mins for detecting network…. However if i open bada or restart andriod the network never loads again? any solution.. I am using the above given ROM and SD Kernel (7.24mb)

    • Mall Jamal

      are u using custom firmware or original firmware for bada?
      this will solve your problem if you flash new firmware for bada. But all application in your phone, contact paid apps will gone. Make sure to make backup before install android for bada. I’m using S4 Style for bada 2.0 and this aops rom 4.3 running fine .

      • Abdul Ghani

        i flashed the phone wid bada 2.0 turkocfw S4 style before installing the andriod ROM but i am facing this prblm :(

        • Mall Jamal

          what animation boot for your android?
          Helly Bean, CM10 or Google?
          I’m using aosp 4.3 rom and don’t have problem when using it.
          Can you send the fota and zimage for me?
          so I can test it?

          • Abdul Ghani

            no prblm wid booting… it shows google logo and den hellybean (which i think is the circles one) then it load into the home screen of andoid.. everything is accessible menu wifi playstore.. but network doesnot load.. the rom i downloaded was http://www.multiupload.nl/SEOYNN9RR7 and kernel was the following http://www.multiupload.nl/HQ3BM7DOTH

          • Mall Jamal

            I see, we don’t use the same rom and kernel.
            I don’t know if I’m using the latest or the previous rom/kernel.
            It’s strange how you can get the both boot for google and hellybean.

          • Abdul Ghani

            wht is the file size of yur zimage and ROM?

          • Mall Jamal

            6,780kb / 6.62mb

          • Abdul Ghani

            Can you upload it somewhr? or better email me on gmail id ghani.ashraf@gmail.com.. and the kernel supports bluetooth calls everything?

          • Mall Jamal

            yes, bluetooth works.. check your email.

          • Abdul Ghani

            thanks… no need to flash it again right? just replace the zimage in memory card by booting in bada? and how much does it take for yur phone to detect network using the above kernel??

          • Abdul Ghani

            modem and calls did u try on this kernel?

          • Mall Jamal

            I’m using wi-fi connect to internet, I didn’t test the modem to connect the internet, but calls is working..

          • Abdul Ghani

            i chkd messages dat is wrkng.. need to chk call functionality.. but the phone lags whn running whatsapp or any odr game.. any soln for dat|?

          • Mall Jamal

            I’m not sure about this and I didn’t think this related to hardware problem. maybe something not right when restore the rom. But I’m not sure about this.. ’cause I don’t see problem to running games in my wave. I don’t try whatsapp, I just try the wechat, tango video call and it’s works only the front camera not works when use to videocall.

          • Abdul Ghani

            worked fine… thanks mate :) i pushed the zimage u gave and everything works fine as far as functionality of phone goes… but games take a bit of time to load which is ok..atleast i can now use whatsapp viber e.t.c..

          • Mall Jamal

            yes… we’all thanks to Tigrouzen for making the Android 4.3 Badadroid Rom and Volk204 and Rebellos.

          • Abdul Ghani

            absolutely.. all credit goes to dem for persisting wid the project.. have u tried the NAND version of the ROM? all i knw abt is dat Bada is removed completely… any reviews u might hve read abt its functionality?

          • Mall Jamal

            I still don’t try it. But I have test the previous rom with nand version. I think, bada will stay and cannot be deleted. Because, for me this android still need bada to run the both boot for bada and android. If there’s nand that can delete bada completly, I still don’t want to erase bada because I’m still use bada. Cause I still make some apps/themes for bada in samsungapps. :)

          • Shino

            Please send me zImage too. My email is shino@dyn-anime.com

          • Mall Jamal

            all files is here: http://adf.ly/WTt6t

          • Krisztián Bende

            Please send me too this zImage….. hawk984@gmail.com …. thanks

          • Mall Jamal

            this kernel for rom aosp 4.3 .. are u using the same rom too?

          • Mall Jamal

            check your email

  • Krisztián Bende

    Install 4.3 ready… it’s really great…. thank’s all for the great job. Some question… in nand version have the phone more memori or same.. my phone mem jet 70-90 MB free, and it a bit slow….my phone music speaker is very quiet why?! Facebokk can’t start…. and a few little bug for me…. what’s the problem? …despite these once it”s a great job.

    • Ankit Gandhi

      could u please share how did u install nand version??,,,i have been stuck here for hours and would really really appreciate ur help

  • shadowrock28

    hi. iwas just asking if my bada version can install this safely or not my version is gt s8500

    bada2.0SLTN1LISS8500JVLC2 Please anyone reply
    ty from (shadowrock28)

    • Mall Jamal

      I can’t say it will safe or not, because there’s will be a problem.
      But if you don’t care about losing paid app or apps in your wave,
      you can install this rom. You just need flash fota to you wave

      are you familiar using multiloader to flash file into wave?
      you can know about flashing firmware into wave, so I think you
      don’t have problem with this.

      hope this will help you, how to install http://adf.ly/WTt6t

      • shadowrock28

        if something wrong happens.. can i delete the rom by formatting the sdcard?

        • Mall Jamal

          yes, you still can use bada..

          • mkhk8367

            Hi Mall Jamal
            Have you tested the CM10.1 Badadroid v1.3 Wave 1,2 (Update 26th Sep) ?
            Is that better?

          • Mall Jamal

            Not yet, cause I already use Aosp 4.3 rom. Are u using badadroid rom?

          • mkhk8367

            I want the badadroid to be useful for daily usages

            But because of call problems of this rom (I have tested i.e. when a person call you sometimes it does not show that & when you want to call someone it suddenly canceled but the other phone receive your call and ring & some other …) I have removed that rom

            Are you comfortable with those problems?

          • Mall Jamal

            I just use this rom to playing games and some apps.
            But sometimes I use this phone to call and sms too. I don’t have problem because I didn’t use 3g or gps. If I want to use 3g video call. I switch it to Bada. So I think, I didn’t have problem with this also I’m using 2 phone and sometimes/everyday I change my sim to my other phone.

  • drahmd

    mall jamal : is this rom support RTL lang. or not plz?

    • Mall Jamal

      I’m sorry, I don’t know what RTL Lang. I’m not developer, I’m just user for android too..

  • manu

    I have 8 GB of memory card, by using the following method : -
    1A : If all ready have SD partitioned then go to 2 else go boot on recovery mode go to advanced menu > partition sdcard and choose half of your SDCARD then choose 0 for swap

    After this I get 4 GB shown when I connect my phone with memory card reader and a disc drive icon in my computer. I would like to know in details for the knowledge what acutally happened who is using half partition.
    When I checked the details using MiniTool Partition Wizard Home Edition . I got information there are all active partition one is fat 32 rest are ext3.. someone can explain??
    refer the image.

    Also please tell me this firmware is very gud but how can we fix bugs like no responding and wait or close issues..

    also there is issue with using the camera front and rear. it lags a got and does not click pictures ..

    • kolle128

      the fat32 partition if for your files. Windows sees this partition. The other partition is for applications. You choose to give half of your card for this when you partitioned. You can repartion in your pc if you don’t like it.

      • manu

        well I am talking abt the last partition was is for 3.19GB , Ext3 it was created when I used it now I can use this. What purpose this was created and for what way it is been used

        • kolle128

          Well android uses 3 types of partitions.
          The Swap/linux swap for extending ram.
          The Fat32, for your files.
          and the Ext2/Ext3/Ext4 partion for applications. You have 3 of thease, I beleave your partitioning is messed up. I’d just redo it on my pc. Just google ‘android partitioning guide’ if you need help with that.

  • sathya kumar

    PLS help SIM card not detected in this ROM in india vodafone

    • mkhk8367

      Don’t be worry about that cause I have the same FEELING
      I think that ANDROID does not belong to my S8500

      • mkhk8367

        but when I connected my phone to pc it suddenly showed the network

    • manu

      I am from india, Gagan Ahuja helped me with this same issue I have vodaphone too

      please follow the steps :-

      Power + Home = Recovery Mode

      You will get CWM- recovery v6.0.3.0

      select wipe data/factory reset

      then reboot system now

      it may take upto 10 mins to load android and may take another 5 mins for network search after android load completes

      • Ankit Gandhi

        i tried what u said but as soon as phone reboots, white wave screen come on and then it disappears…screen goes black after that…earleier i used to get a google icon whenever i used reboot my phone…is this normal??

        • manu

          you should wait for some time like 5 to 10 minutes in case same issue try to re install the firmware..

          • Ankit Gandhi

            are you sure this method works?? i am reinstalling the firmware again and will try this…i have vodafone connection though…are u getting network in ur phone??

          • manu

            yes I am getting the network in my phone and it is working fine on mobile signals and also on wifi. not tried data services.

          • sathya kumar

            BSNL SIM card working .but Vodafone Sim card not working which is working on BADA

  • Zack Zen

    Kernel SD Wave II : You can use it with Volk rom like just replace zImage from this one and follow instruction to have Ls Rom on SD

    To correct wifi you need push nvram_net.txt from Volk all ready installed rom on /vendor/firmware/

    http://www.multiupload.nl/O29NVET62L

    Also for all Ls user Wave I : to get last modem update just download it from Volk thread unzip libmodem-ril.so and push it on /system/lib/ dont forget chmod 644 /system/lib/libmocha-ril.so

    Tigrouzen

    • Ankit Gandhi

      didnt quite understand what you wrote about the modem update…I have a wave 1 and didnt get a network since i installed this rom..could you please help??

  • rbgumti

    i m in a big problem
    I tried to install android on my wave 1.
    Now it is showing white screen and it just starts blinking and it is also not going into download mode
    It enters into download for a second and then again starts blinking.

    plz anbody help me

    • Mall Jamal

      open your battery for at least 30 second. and don’t turn ON your phone. Just connect your phone into charger or Usb charger. Just wait and when the phone show the charger animation is show. You can try to enter Download Mode with press and holding ” Volume Down + Lock + Power “

      • rbgumti

        when i connect to charger it starts blinking and it gets very hot in 5 minutes and i can enter download mode but it restarts again to white blinking screen.

        • Mall Jamal

          I have the same problem before, I just let my phone turn off and pull out the baterry for a momment. Then put the battery and charges it about 50% battery power, then, I can use download mode without problem. so I can flash file.

  • rbgumti

    m in a big problem
    I tried to install android on my wave 1.
    Now it is showing white screen and it just starts blinking and it is also not going into download mode
    It enters into download for a second and then again starts blinking.

    plz anbody help me

  • Krisztián Bende

    Somebody tell me who ues this rom with V3 NAND (bada os is deleted) the android os have more mem or same with Kernel V3 ?! … beacuse i used this (Kernel V3) and the phone is too slow.. android have 70-90 MB free mem. Install android in clear bada…

  • Mall Jamal

    How to install . not nand version http://adf.ly/WTt6t

  • Kishore

    Is whatsapp also working?

  • Shino

    I want install this rom without partition SD card? So how to install? Must be partition SD card or not?

  • Kishore

    Is grps working in this ROM?

  • Said Haddout

    pLZ MAkE 4.3 fOR fOR WaVE 8530 plzzzzzzzzzzzzzzz

  • drahmd

    mall jamal : i’m using turko cv 10 s4 style .if i try this rom and not satisfied with it should i reflash my firmware again ? is this affecting my 5800 harmfully..?…..thanks alot

  • manu

    Hey guys can any one tell me on this 4.3 firmware how to go to Check Usb debugging on Dev menu. I am unable to find these settings if someone can help with screen shoot it will be great..

    • badaDROID

      Hi !

      Just You should download and install LATEST SAMSUNG USB DRIVERS FOR MOBILE PHONES 1.5.27.0 from the link below:

      http://forum.xda-developers.com/showthread.php?t=2038555

      after installation , reboot your PC then connect your WAVE to it.

      so in Setting menu Usb debugging will appear !

      Also it’s better to use “Wondershare MobileGo ” software to manage your badaDROID .

      • manu

        Hi guys ,
        Well I have already updated drivers for samsung. when my wave is in recovery mode than when I open “QtADB” it shows me phone is connected. When I connect my phone again when booted to JB 4.3 it shows me to connect as mass storage. I have searched in entire manual of settings of this firmare unable to find debug mode. as I have had in 4.2 firmwares.. Base line is in this firmware I do not see any developer mode or it is hiden from settings. Kindly someone help me so that I can use this QtADB.
        PLEASE NOTE:-
        I have andorid managers like mobile genie and moborobo they are good please UNDERSTAND I NEED help to find WHERE IS DEBUGGING MODE or developer mode in this firmware 4.3?????

        • badaDROID

          Hi !
          You should go to the Setting menu then inter to the
          ” About Phone ” So tap 7 times on “Build Number”
          after that” Developer Options “will be shown in the Settings
          and you can active USB Debugging from there.

  • RyanDesigner

    how many ram had used in this Rom??? is it 272mb????

  • habcubjb

    si ti only me or sometimes the calls and the network doesn t work

    • Abdul Ghani

      yes all of a sudden during the day the network stops working.. i try to call and the phone shows tht call has ended yet the odr person is receiving a call…. need a stable and bug free kernel

  • Kamran

    ? really did not understand anything. ? have flashed many times, but I never met this kind before. Can somebody list procedures in a logical way for me? Thanks in advance

  • Marius

    HI, This version have overheating protection ? Can I leave the phone connected to 100% ? Ty

  • saltcushy

    after struggling with Aosp 4.3 R3 LS my system storage allowed is 46mb and fash of rooms doesn’t works as well android recovery mode no start up.

  • saltcushy

    after the struggle with Aosp 4.3 R3 LS my(s 8500) system storage on Bada is 46mb allowed and installed others rooms doesn’t works(downloaderx, security faild) as well android recovery mode no start up and hard reset failed.

  • billy

    when we restore cmw file…..it gives md5 mismatch error

    • billy

      someone please help

  • Jo Mo

    Does Calendar work for anyone? It doesnt sync or add my google calendar for me

  • badaDROID

    Thanks a lot to Tigrouzen,Volk204 and Rebellos

    Do you want to continue this project?

    and make it perfect

    it’s actually will be amazing

    We are impatiently waiting for you to make it ready.

    Good Luck !

  • Majers

    HI all

    I can not configure the APN, it do not want to save the configurations, either for mms and internet.
    Any solution for it ?

  • Abhi Panchal

    i have a problem with my
    i m from india..
    if i insert the prepaid sim then it works and when i insert the postpaid sim there is no network available ever though both the sim’s are of vodafone carrier only.
    NEED HELP. PLZPLZPLZ

  • Crowely

    Hi! I want to enable the caller id in the call settings, but when i tap the additional settings appeard an error message: network or sim card error. Then it go back to the call settings menu. Anyone have an idea, how to enable the caller id in this rom?

  • Hacking Master

    i am not getting partition sd card option in recovery

  • Wave y

    can i install this rom on wave y

  • Hashwanth Ram

    Can some one help me .. I want 2 desperately change my samsung into android.os …. I heard lot of complication regarding the installation
    Later call function,wifi may not work it seems .. So can some one help me throughout the process or a video tutorial may be handy

  • Hashwanth Ram

    I am using samsung wave 2 s8530

  • Dev D Sultan

    why cant you guyz simply guide ‘how to install the ROM’. the language used in this tutorial is really very complex and I’m sure that people will not be able to understand these terms. Just simply give the valid links to download and mention the steps to install it.

  • Agon Dragon

    if wave 533 can not?

  • Agon Dragon

    for wave 533 can not?